Available Options
Ask a Question About This Product
Quick answer
The ENJOMOR GS-DK01 is an assembled 8cc, air-cooled OHV four-stroke single-cylinder gasoline model with a manual-pull starting arrangement. This store offers Engine or Engine & Starter Kit versions. Select the intended version before payment; a displayed accessory or exploded diagram does not mean that item ships with Engine alone.
Why this exact model?
The gallery shows a real model from side and overhead angles, plus a supplier exploded illustration and dimensional drawing. Those views clarify the compact cylinder, crankcase and approximate mounting envelope; they are not an invitation to disassemble a new unit. The 8cc GS-DK01 should not be confused with ENJOMOR's larger multicylinder families.
Supplier-listed specifications
| Model / displacement | ENJOMOR GS-DK01 / 8cc |
|---|---|
| Architecture | Vertical single-cylinder OHV, four-stroke |
| Supplier-listed bore × stroke | 23 × 23 mm |
| Cooling / starting | Air cooled / manual pull |
| Supplier-listed fuel mixture | 95# gasoline and 2T oil at 25:1; confirm manual |
| Supplier-listed size / weight | 11 × 9.3 × 12 cm / about 630 g |
Figures are supplier specifications for the named model, not independent performance measurements. Product photographs may show a display arrangement; the selected order option controls the configuration.
What is included—and what still needs checking?
The supplier page is internally inconsistent: its specification lines say CDI ignition and the spark plug are not included, while its packing list names CDI parts and a fitted plug. For that reason, this listing does not promise those components in the Engine option. Choose Engine & Starter Kit only if the accessory bundle shown in the selector is needed, and ask support to verify exact in-box ignition and starter parts before purchase.
First-run and safety considerations
The supplier describes a pull-start, CDI-driven model and specifies clean fuel to avoid blocking the carburetor. Verify plug, ignition supply and fuel/oil mixture against the manual and actual delivered parts before the first attempt. Do not energize unknown wiring or assume the 10–12 V supplier figure applies to every included component. Use a secured, ventilated test stand, fire protection and a clear zone around the pull handle and output shaft.
Which nearby model should you compare?
For a smaller OHV single with an explicitly listed CDI pack, compare the MUSA F1 2.7cc. For a larger green 7cc single with an independent oil system, see the MUSA FV1A. The right decision depends on included accessories, displacement and starting method, not displacement alone.
Frequently asked questions
What is the difference between the two options?
Engine is the base selection; Engine & Starter Kit adds the option-named kit. Review the live selected price and order line before checkout.
Are CDI and spark plug definitely included?
The supplier's specification and packing list conflict. We cannot promise them for Engine alone without direct pack confirmation; contact support if this determines your purchase.
Is this a two-stroke engine?
No. The supplier identifies a four-stroke OHV engine, even though it specifies 2T oil in the fuel mixture.
Can I use it in a vehicle?
No RC compatibility or loaded power output is guaranteed. Verify mounting, fuel, cooling and transmission requirements independently.
Before ordering
Match the model code and selected option to your use case; inspect the parts list, manufacturer instructions and local fuel rules. The final cart line reflects the version purchased. Supplier availability can change before fulfillment; contact EnginesDIY support before placing an order if timing or a particular accessory is essential.
Source for manufacturer-specific specifications and packing claims: EngineDIY supplier listing for ENJOMOR GS-DK01 8cc OHV Single-Cylinder Gasoline Engine. Product information reviewed 23 September 2026.