0
48
Quick answer: If a nitro RC engine suddenly becomes very hard or impossible to turn after priming, stop the starter immediately. Do not pull harder..
0
21
Quick answer: Do not judge a used nitro RC car by whether the engine starts during a seller's demonstration. First identify the exact model and eng..
0
22
Quick answer: Old nitro fuel does not become harmful on a fixed birthday. A tightly capped original can kept cool, dry and away from heat may remai..
0
30
Quick answer: Some glow engines can operate on fuel containing 0% nitromethane, but that does not make zero-nitro fuel a drop-in choice for every n..
0
32
Quick answer: Diagnose a suspected nitro RC engine air leak by separating three systems: throttle control, tank/exhaust pressure, and the engine's int..
0
45
Quick answer: A nitro RC engine should sit on clean, flat, compatible mounting surfaces without being pulled into position by its screws. Dry-fit t..
0
39
Quick answer: Set a nitro RC throttle/brake linkage from the mechanics outward. With the radio on and trims neutral, the carburetor must sit at the e..
0
33
Quick answer: A nitro RC foam air filter works only when the correct oil is distributed through the full foam depth and every intake-air path is se..
0
44
Quick answer: Identify the exact engine and fuel first, then follow that engine manual's shutdown, residual-fuel removal and preservation path. Do ..
0
44
Quick answer: Start with the propeller range in the exact engine manual, then narrow it using the airframe manual, propeller manufacturer's applica..
0
49
Quick answer: A stripped spur gear is evidence of a drivetrain problem, not a diagnosis by itself. Disable the engine, then check four separate int..
0
61
Quick answer: A model-engine starter is only one link in a torque path. First make the engine unable to start, then determine whether the crankshaf..