0
17
Quick answer: A nitro RC engine should sit on clean, flat, compatible mounting surfaces without being pulled into position by its screws. Dry-fit t..
0
20
Quick answer: Set a nitro RC throttle/brake linkage from the mechanics outward. With the radio on and trims neutral, the carburetor must sit at the e..
0
17
Quick answer: A nitro RC foam air filter works only when the correct oil is distributed through the full foam depth and every intake-air path is se..
0
25
Quick answer: Identify the exact engine and fuel first, then follow that engine manual's shutdown, residual-fuel removal and preservation path. Do ..
0
27
Quick answer: Start with the propeller range in the exact engine manual, then narrow it using the airframe manual, propeller manufacturer's applica..
0
35
Quick answer: A stripped spur gear is evidence of a drivetrain problem, not a diagnosis by itself. Disable the engine, then check four separate int..
0
47
Quick answer: A model-engine starter is only one link in a torque path. First make the engine unable to start, then determine whether the crankshaf..
0
69
@media (max-width: 767px) {
html.route-journal3-blog-post,
html.route-journal3-blog-post body,
html.route-journal3-blog-post..
0
67
@media (max-width: 767px) {
html.route-journal3-blog-post,
html.route-journal3-blog-post body,
html.route-journal3-blog-post..
0
80
@media (max-width: 767px) {
html.blog-post-38,
html.blog-post-38 body,
html.blog-post-38 .global-wrapper,
html.blog-po..
0
81
Quick answer: Choose model-engine oil only after identifying how the engine is designed to carry lubricant. A glow or nitro engine may receive oil ..
0
85
Quick answer: Set model-engine ignition timing from the exact manufacturer's specification, not from a generic angle or the visible Hall-sensor pos..